CPLRazor hoffmantactical this is the first I am hearing of one, I’ll try. Hope they work with spec Armalite AR-10’s. Any filament or other settings you would advise? I’m just getting into squirting components and look forward to the possibilities. Would love to show of my first SSbuild one of these days. Keep safe Raz
hoffmantactical Its LR-308 compatible, so probably won't work with AR-10. But worth a shot. PLA Pro works well. 0.25 nozzle is a must.
CPLRazor hoffmantactical I’ll try, just need to find one for my prusa, but I mocked one up with a 0.4mm for a possible test run, and it seemed to run beautifully, hand cycling it.
1969ivan1 I would like to SS my BRN10 and wonder if anyone out there may have done this already and could share their recipe?
undeadchew 1969ivan1 There's nothing that I know of that exists to make it work yet. However for all of these bufferless upper receivers I was imagining making a lower with integrated sliding trip sleds. I may try designing one for the FM15 upper.
Fringe44 I have the PSA 10 as well hand test standard ss worked seemingly. Guy brings me his Ruger sfar it doesn’t work in it. The bolt will not travel to the rear for a full charge. I see mention of ss for the LR 308 is this why his Ruger won’t work with the standard ss. ? Thanks for any advice or directions. This is his ss not mine I just tried it in mine to rule out possible issues.
Fringe44 Where can I get this lever from and is it specific to any one ss system? Thanks for the reply and info very much appreciated!!
Fringe44 Where can I get this lever from and is it specific to any one ss system? Thanks for the reply and info very much appreciated!!
Shaddy MrTurtle hi I watched your videos on YouTube, what link did you use to buy the proper lever for super safe on a ar10
PhallicArms I tried the 3D printed Mars Triggers 308 levers in a DPMS gen 1 rifle. I couldn't get them to work. The bolt would fly over the lever and not get picked back up. I ended up going with the one for Grey Market Research. I don't see how it could work without a spring.
hoffmantactical Yes, it has to have a spring return of some type. I like the hat method, but the fully sprung system is good too.
