SL-9 Super Safety

Brandong3125

Hey does anyone know what needs to be done for the super safety to work on the SL-9? I know there is some trimming needed on the BCG, but im not sure exactly what to do.
I got the 9mm trim jig from @ResetNinja but dont know how to use it. My BCG doesnt even seem to fit in the jig.

Also bought a metal SS kit from @ResetNinja so i really wanna put it on my 4in Davidson Defense SL-9 Build!!

undeadchew

Brandong3125
Is this what your BCG looks like?

CCClinton

Here is what I had to do. I removed the weight and ground out a flat space level with the sides. Here is where I got the info on how to do it.

Brandong3125

CCClinton

Hey sorry for the late reply.

I ended up grinding my BCG just like that, i used a jig i got from reset ninja a while back.
After that i got the 10oz KAK buffer weight. And a SS with machined trigger kit from greymarket research.

I got it to work with function test, and went out and was able to dump a full mag. But after that full mag i cannot get it to work again. It does not work dry function testing with the upper assembled anymore. But does work with the upper removed and my using my finger to push the level down.

Im assuming for some reason the BCG is not pushing the cam/ lever down all the way? Ive tried another SS and trigger kit i have in my SL-15 build but also does not work.

Im trying to figure out how to fix it, was wondering if you had issues like this or have any insight that can help me get this working?