Hello my steel super safety won’t fire in super safe mode . It fires in semi but the trigger will not pull in super safe… any ideas ?
Steel super saftey won’t fire in super safe mode
It’s probably because you have a semi auto BCG. After charging the rifle the BCG is not brining the level back in the forward position due to the cut in the semi auto BCG. And because of that, the level is stays in the back position which blocks the trigger form being pulled.
Brandong3125 even when I disconnect the lower it still won’t fire on super safety you sure it’s the bolt?
MakabaYAH
Could be that the trigger isn't cut/rounded enough.
undeadchew the video below is what happens when I pull the trigger on super safety. I’ll take it to the gun smith and see what he can do
Is this semi auto or full auto
MakabaYAH Full profile,
I've previously addressed the two main issues I've come across with purchased metal super safeties.
https://forum.hoffmantactical.com/d/181-how-about-a-super-safety-trouble-shooting-page
Firstly the one you are dealing with where the trigger has too much material highlighted in green. I used a file to make small refinements removing a little bit of material at a time and then testing.
Second the lever having too much material also highlighted in green on the top causing the bolt to get stuck in the buffer tube.
undeadchew hey thanks so much man i really appreciate all the help!