I found a video that showed I have to dremel down the top of the cam so is able to move and let the trigger function. I did that. I had the trigger group and safety operating as it should by hand.
Then I tried to put the bolt carrier back in. It would not go. I tapped it a little with a nylon pin hammer to get it to mark the cam so I could see where the issue was. I filed that down a very little but I was afraid it would affect the function so I didn’t go anymore.
I then assembled the gun by putting the bolt in first, then the safety, trigger group…
The gun functions but the SS does not. The trigger has to be pulled very hard to get it to let the hammer go.
Any ideas what the issue might be?
This is a Zastava M92 and this was all by hand so far. No rounds yet.