Nozzle size

VibbrantJD

I wanted to try to print the sl15 in PPA-CF from Bambu Labs so I bought the filament and 0.6mm hardened steel hotend. Now Im wondering if the size is still going to be perfect or will the bigger nozzle cause for slight difference in the finished print size. Or will I have to buy the 0.4mm nozzle. Sorry fairly new to 3D printing here

hoffmantactical

0.6 will work. Though with the Bambu PPA-CF I think you could get away with 0.4, and the surface finish will be better.

Extrusion width is important when using a 0.6 nozzle. Use 0.6 mm for the outer perimeter, top layer, and support. I use 0.7 for the rest of the print.